 |
| Manufacturer | Carbon and Low Alloy |
|---|
| Product Name | Lincoln - UltraMag S6 |
|---|
Ultramag S6
AWS ER70S-6
Diameter (mm) 0.6, 0.8, 0.9, 1.0, 1.2, 1.6
Lincoln's premium copper coated MIG wire, Ultramag S6 is an excellent choice for welding on metals with a medium to high presence of millscale. For best performance use on clean, oil-free, and rust-free base material. Best weld appearance and toe wetting when compared to ER70S-3 and ER70S-4 classifications. Ultramag S6 has high silicon and manganese deoxidizer levels. Superior feedability and excellent arc characteristics are trade-marks of Ultramag S6. Shielding gases include argon/carbon dioxide blends, argon/oxygen blends, straight carbon dioxide, and three or four-part gas mixes.
Advantage Lincoln
• MicroGuard Ultra surface treatment for superior feeding and arc enhancement agents for excellent arc stability.
• Copper coating provides superior arc starting characteristics, for long contact tip life and is manufactured not to flake, which can clog liners and contact tips.
• Will support all of the traditional modes of GMAW metal transfer: short-circuiting, globular, axial spray, and pulsed spray transfer.
• Well suited for applications where accurate and consistent wire feed are necessary.
• Excellent spatter control and bead profile Manufactured to standards for ISO 14001 environmental and ISO 9001 quality management systems.
Typical Application
• For welding on base material that has medium to heavy millscale.
• Automotive repair.
• Sheetmetal to multiple pass applications on 55,000 to 70,000 psi (379 to 483 MPa) yield strength base metal.
• May be used in single arc or Tandem MIG & trade; applications.
• Pipe welding, pressure vessels, steel buildings and structural steel.
Conformance
• AS 2717.1 ES6-GC/M-W503AH.
• AWS / ASME A5.18: ER70S-13 |