|
|
|
|
 |
| Manufacturer | Solders |
|---|
| Product Name | COMWELD 50/50 SOFT SOLDER. A higher quality general purpose solder. |
|---|
COMWELD 50/50 SOFT SOLDER
COMWELD 50/50 Solder is a higher quality general purpose solder for general sheet metal work, and plumbing (not water pipes) applications where better free flowing characteristics are important.
The Resin Cored COMWELD 50/50 solder is especially suited for electrical and electronic work where residues which remain after soldering are non-corrosive and non-conductive.
Procedure for Soldering:
1. Thoroughly clean all areas to be joined of
foreign material.
2. Apply COMWELD 965 Soldering Flux
(321890) to the work area. If using flux
cored solder this will be automatic at step
four (4).
3. Heat the work surfaces directly by the use
of a soldering iron or indirectly by the use of a soft gas flame, such as LPG. Do not overheat.
4. Apply solder to the work area. The molten solder should easily flow and be evenly dispersed in the joint area. Do not over fill with solder.
5. Remove heat source and allow to cool naturally until solder returns to a solid state.
6. Remove all flux residues with water. | |
|
|